z13_train_wheel-2 z13_worker-2 z13_valve-2 z13_emergency_vehicle-2 z13_radar-2 z13_electric_tower-2
logo-psi

Product Source International Datacomm
Premier Distributor of DZS products

201.488.6000

linkedin

Certes

certes-5-pillars

DZS Imacs

imacs-8000-header

Bulk Fiber

z13_fiber_cable

GPON ONT

zhone fttx znid gpon 4201

Tibit

tibit-microplug-header

FTTx

fttx-znid-gpon-4111-front-med
HOME ->  OLT ->  MXK ->  MXK T1/E1 PWE Line Card

MENU

OLT

MXK

DATASHEETS

MANUALS & GUIDES

REFERENCE GUIDES

SUPPORT

 

logo-psi

 

logo-dzs-1

 

logo-certes-blue-gray

 

logo-fonex

 

logo-loop-telecom

 

 

DZS MXK T1/E1 PWE Line Cardzhone malc pwe

T1/E1 PWE Line Card

MXK-PWE-T1/E1-24

Overview

The MXK T1/E1 PWE line card uses PWE3 Psuedo-wire Emulation End-to-End) technology and is designed to work with other TDMoIP devices from DZS. Customer premise equipment from DZS supporting TDMoIP can be used with the T1/E1 PWE line card in the MXK for a complete end-to-end TDM over packet solution. Each line card supports up to 24 T1/E1 circuits that can each be separated from other network traffic using IEEE 802.1Q VLANs. DZS's PWE implementation supports both structured and unstructured circuits.

Although many networks have upgraded or will upgrade to packet transport, older products still require TDM interfaces. The T1/E1 PWE line card for the MXK supports Circuit Emulation over a packet network allowing TDM-based services to be transported over the packet network. Using a single network infrastructure for both packet and TDM services saves OPEX and CAPEX.

Service providers can use MXK's flexible architecture to deploy different technologies such as POTS, xDSL, xPON, EFM and Active Ethernet on the same platform in their Central offices or Remote Terminals as a fiber to the premises (FTTP) or Fiber to the node (FTTH) network element. The MXK chassis is available in multiple form factors providing a solution for all deployment sizes.

 

Specifications

Features

  • DM support in a Next Generation Network
  • T1/E1 structured/unstructured CES support
  • Multiple clock recovery mechanisms
  • Works in the MXK chassis alongside the most flexible family of line cards in the industry: from POTS to VDSL2, from T1/E1 to PON
     

Power

  • Maximum power draw: 20W
     

Interfaces

  • 96-pin Molex connector for 24 T1 or E1 Circuits
     

Standards Support

  • IETF-PWE3 TDMoIP
  • ITU-T G.823/824
  • ITU-T Y.1413, Y.1414
  • ITU-T Y.1452, 1453
  • D4 and ESF per T1.403
  • IEEE 802.3 Ethernet
  • 802.1Q, 802.1p

Protocol Support

  • Bridging 802.1D
  • VLAN 802.1Q tagging
  • 802.1ad (Q-in-Q)
  • 802.1p marking and queuing
  • IP routing
     

Management

  • ZMS (DZS Management System) via SNMP
  • Terminal for Command Line Interface (CLI)
  • Web UI
     

Operating Requirements

  • Temperature: -40°C to 65°C
  • Non operating temperature: -40°F to 158°F (-40°C to 70°C)
  • Humidity: Up to 85%, non-condensing
logo-psi

We sell and support
DZS products and solutions

Please contact PSI at
 201.488.6000
for a quote

HOME | SOLUTIONS | SUPPORT | CONTACT US | Terms and Conditions of Sale

All logos, brand, product, service, and process names are trademarks or service marks of their respective holders and are protected by U.S. and international copyright laws and treaty provisions. All trademarks and registered trademarks are the sole property of their respective holders. All photographs are courtesy of respective manufacturers. All specifications, products, product names, schedules, content and prices are subject to change without notice. No warranty is made as to technical accuracy. No warranty is made with respect to the merchantability of any product, service or solution or the fitness of any product, service or solution for any particular purpose or use. Nothing contained herein shall be construed as conferring any license or right under any copyright, trademark, patent or other intellectual property rights. 240105-1908





 

z13_tornado-1a

video

Manufacturers